This documentation is for Dovecot v2.x, see wiki1 for v1.x documentation.
Differences between revisions 65 and 78 (spanning 13 versions)
Revision 65 as of 2015-04-30 13:40:18
Size: 9515
Editor: broadband-188-255-26-201
Revision 78 as of 2019-09-11 14:05:46
Size: 70
Comment: Moved to new doc
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
= Mail location =

 * For mbox-specific settings, see [[MailLocation/mbox]]
 * For Maildir-specific settings, see [[MailLocation/Maildir]]
 * For dbox-specific settings, see [[MailLocation/dbox]]

There are three different places where the mail location is looked up from:

 1. {{{mail_location}}} setting in {{{dovecot.conf}}} is used if nothing else overrides it.
 1. {{{mail}}} [[UserDatabase|userdb field]] overrides {{{mail_location}}} setting.
 1. {{{location}}} setting inside namespaces overrides everything. Usually this should be used only for public and shared namespaces.

By default the `mail_location` setting is empty, which means that Dovecot attempts to locate automatically where your mails are. This is done by looking at `~/Maildir`, `/var/mail/username`, `~/mail` and `~/Mail` in that order. It's usually a good idea to explicitly specify where the mails are, even if the autodetection happens to work. Autodetection commonly fails for new users who don't have the mail directory created yet.

== Format ==

The format of the mailbox location specification is as follows:

  ''[[MailboxFormat|mailbox-format]]'' : ''path'' [ : ''key'' = ''value'' … ]


 * ''mailbox-format'' is a tag identifying one of the formats described at [[MailboxFormat|Mailbox Formats]].
 * ''path'' is the path to a directory where the mail is stored. This must be an absolute path, not a relative path. Even if relative paths appear to work, this usage is deprecated and will likely stop working at some point. Do not use the home directory, for reasons see [[VirtualUsers/Home|Home vs. mail directory]]
 * ''key'' = ''value'' can appear zero or more times to set various optional parameters. Possible values for ''key'' are:
  * {{{INDEX}}} : specifies the location of [[#Index_files|index files]].
  * {{{INBOX}}} : specifies the location of the [[#INBOX path|INBOX]].
  * {{{LAYOUT}}} : specifies the directory layout under the [[MailLocation/mbox#Directory_layout|mbox]] or [[MailLocation/Maildir#Directory_layout|Maildir]] formats.
  * {{{CONTROL}}} : specifies the location of control files under the [[MailLocation/mbox#Control_files|mbox]] or [[MailLocation/Maildir#Control_files|Maildir]] formats.
  * {{{SUBSCRIPTIONS}}} : specifies the file used for storing subscriptions. The default is "subscriptions". If you're trying to avoid name collisions with a mailbox named "subscriptions", then also consider setting {{{MAILBOXDIR}}}.
  * {{{MAILBOXDIR}}} : specifies directory name under which all mailbox directories are stored. With [[MailboxFormat/dbox|dbox formats]] the default is "mailboxes/" while with other mailbox formats the default is empty. Typically this should be changed only for [[Plugins/Lazyexpunge|lazy_expunge namespace]] with mdbox.
  * {{{DIRNAME}}} : specifies the directory name used for mailbox directories, or in the case of mbox specifies the mailbox message file name. With [[MailboxFormat/dbox|dbox formats]] the default is "dbox-Mails/" while with other mailbox formats the default is empty. Can be used under either [[MailLocation/mbox#Message_file_name|mbox]], [[MailLocation/Maildir#Mailbox_directory_name|Maildir]] or [[MailLocation/dbox#Mailbox_directory_name|dbox]] formats. Note that this directory is used only for the mail directory and the alt directory, not for index/control directories (but see below).
  * {{{FULLDIRNAME}}} : Same as {{{DIRNAME}}}, but use the directory name also for index and control directory paths. This should be used instead of {{{DIRNAME}}} for new installations. (v2.2.8+)
  * {{{ALT}}} : specifies the [[MailLocation/dbox#Alternate_storage|Alternate storage]] path for dbox formats.
 * The colons and equals signs are literal and there are no spaces in an actual mailbox location specification.

== Variables ==

You can use several variables in the `mail_location` setting. See [[Variables]] for a full list, but the most commonly used ones are:

 * `%u`: Full username.
 * `%n`: User part in user@domain, same as %u if there's no domain.
 * `%d`: Domain part in user@domain, empty if there's no domain.

== Typical settings ==

Typically with Maildir it would be set to:

mail_location = maildir:~/Maildir

with mbox:

mail_location = mbox:~/mail:INBOX=/var/mail/%u

or if you'd like to use the [[MailboxFormat/dbox|dbox]] format:

# single-dbox
mail_location = sdbox:~/dbox


# multi-dbox
mail_location = mdbox:~/mdbox

Use only absolute paths. Even if relative paths would appear to work, they might just as well break some day.

== Directory hashing ==

You can use two different kinds of hashes in [[Variables|variables]]:

 * %H modifiers returns a 32bit hash of the given string as hex. For example {{{%2.256H}}} would return max. 256 different hashes in range 00 .. ff.
 * %M returns a MD5 hash of the string as hex. This can be used for two level hashing by getting substrings of the MD5 hash. For example {{{%1Mu/%2.1Mu/%u}}} returns directories from {{{0/0/user}}} to {{{f/f/user}}}.

== Index files ==

Index files are by default stored under the same directory as mails. With maildir they are stored in the actual maildirs, with mbox they are stored under {{{.imap/}}} directory. You may want to change the index file location if you're using [[NFS]] or if you're setting up [[SharedMailboxes|shared mailboxes]].

You can change the index file location by adding {{{:INDEX=<path>}}} to mail_location. For example:

mail_location = maildir:~/Maildir:INDEX=/var/indexes/%u

The index directories are created automatically, but note that it requires that Dovecot has actually access to create the directories. Either make sure that the index root directory ({{{/var/indexes}}} in the above example) is writable to the logged in user, or create the user's directory with proper permissions before the user logs in.

If you really want to, you can also disable the index files completely by appending {{{:INDEX=MEMORY}}}.

== Private index files (v2.2+) ==

Since v2.2 the recommended way to enable private flags for shared mailboxes is to create private indexes with :INDEXPVT=<path>. See [[SharedMailboxes/Public]] for more information.

== INBOX path ==

INBOX path can be specified to exist elsewhere than the rest of the mailboxes, for example:

mail_location = mbox:~/mail:INBOX=/var/mail/%u
mail_location = maildir:~/Maildir:INBOX=~/Maildir/.INBOX

Note that it's still not possible to mix maildir and mbox formats this way. You need to use [[Namespaces|namespaces]] for that.

== Homeless users ==

Having a home directory for users is highly recommended. The [[Pigeonhole]] [[Pigeonhole/Sieve|Sieve plugin]] already requires a home directory to work, and it probably won't be the last feature to require a home. See [[VirtualUsers#homedirs]] for more reasons why it's a good idea, and how to give Dovecot a home directory even if you don't have a "real home directory".

If you really don't want to set any home directory, you can use something like:

mail_location = maildir:/home/%u/Maildir }}}

== Per-user mail locations ==

It's possible to override the default {{{mail_location}}} for specific users by making the [[UserDatabase|user database]] return `mail` [[UserDatabase/ExtraFields|extra field]]. See the [[UserDatabase|user database]] page for the specific userdb you're using for more information how to do this. Below are however a couple of examples.

Note that %h doesn't work in the userdb queries or templates. ~/ gets expanded later, so use it instead.

Note also that since {{{location}}} specified within a [[Namespaces|namespace]] overrides mail_location setting, in case you specified that parameter, you'll have to override in in the user database, specifying {{{namespace/inbox/location}}} extra field instead of {{{mail}}}.

=== SQL ===

user_query = SELECT home, uid, gid, mail FROM users WHERE user = '%u' }}}

=== LDAP ===

user_attrs = homeDirectory=home, uidNumber=uid, gidNumber=gid, mailLocation=mail

=== Passwd-file ===

user:{PLAIN}password:1000:1000::/home/user::userdb_mail=mbox:~/mail:INBOX=/var/mail/%u }}}

== Mixing mbox and maildir ==

It's possible to use both mboxes and maildirs for the same user by configuring multiple namespaces. See [[Namespaces]].

Having both mboxes and maildirs mixed within the same namespace isn't currently supported.

== Custom mailbox location detection ==

Dovecot by default detects the mailboxes in this order:

 1. maildir: ~/Maildir
 1. mbox: ~/mail, and /var/mail/%u if it exists
 1. mbox: ~/Mail, and /var/mail/%u if it exists

If you need something else, you can override the `mail_executable` setting to run a script, which sets the MAIL environment properly. For example:


if [ -d $HOME/.maildir ]; then
  export MAIL=maildir:$HOME/.maildir
  export MAIL=mbox:$HOME/mail:INBOX=/var/mail/$USER

exec "$@"

=== Custom namespace location ===

If you need to override namespace's location, first give it a name ("user" below):

namespace user {

Then in the script use:


# do the lookup here

export USERDB_KEYS="$USERDB_KEYS namespace/user/location"
exec env "NAMESPACE/USER/LOCATION=$location" "$@"
Moved to

None: MailLocation (last edited 2019-09-11 14:05:46 by MichaelSlusarz)