This documentation is for Dovecot v2.x, see wiki1 for v1.x documentation.
Differences between revisions 39 and 40
Revision 39 as of 2013-04-10 21:32:56
Size: 8942
Editor: TimoSirainen
Comment:
Revision 40 as of 2013-05-25 00:33:47
Size: 9016
Comment: tell how to specify \ as a separator... if one just sets \ ... nothing will happen and dovecot does not even complain
Deletions are marked like this. Additions are marked like this.
Line 41: Line 41:
A commonly used separator is '/'. It probably causes the least amount of trouble with different IMAP clients. '^' separator is troublesome with Thunderbird. A commonly used separator is '/'. It probably causes the least amount of trouble with different IMAP clients.
'^' separator is troublesome with Thunderbird.
When '\' should be used it must be quoted, so one sets separator = "\\"

Namespaces

Dovecot supports fully configurable namespaces. Their original and primary purpose is to provide Namespace IMAP extension (RFC 2342) support, which allows giving IMAP clients hints about where to locate mailboxes and whether they're private, shared or public. Unfortunately most IMAP clients don't support this extension.

Dovecot namespaces can be used for several other purposes too:

  • Changing the hierarchy separator
  • Providing backwards compatibility when switching from another IMAP server
  • Provides support for public and shared mailboxes

  • Allows having mails in multiple different locations with possibly different formats

Configuration

In v2.1+ there's a default inbox namespace added in 10-mail.conf. If the configuration doesn't explicitly specify a namespace (as was in v2.0 and older) a default namespace is created automatically.

The section name in namespaces (e.g. namespace sectionname { .. }  is used only internally within configuration. It's not required at all, but it allows you to update an existing namespace (like how 15-mailboxes.conf does) or have userdb override namespace settings for specific users (namespace/sectionname/prefix=foo/).

Namespace types

There are 3 types of namespaces:

Hierarchy separators

Hierarchy separator specifies the character that is used to separate a parent mailbox from its child mailbox. For example if you have a mailbox "foo" with a child mailbox "bar", the full path to the child mailbox would be "foo/bar" if the separator was '/'. With a separator '.' it would be "foo.bar".

IMAP clients, Sieve scripts and many parts of Dovecot configuration use the configured separator when referring to mailboxes. This means that if you change the separator, you may break things.

However, changing the separator doesn't change the on-disk "layout separator". For example:

mail_location

Layout sep

NS sep

Mailbox name

Directory

maildir:~/Maildir

.

.

foo.bar

~/Maildir/.foo.bar/

maildir:~/Maildir

.

/

foo/bar

~/Maildir/.foo.bar/

maildir:~/Maildir:LAYOUT=fs

/

.

foo.bar

~/Maildir/foo/bar/

maildir:~/Maildir:LAYOUT=fs

/

/

foo/bar

~/Maildir/foo/bar/

Note how the "namespace separator" changes only the "Mailbox name", but doesn't change the directory where the mails are stored. The "layout separator" can only be changed by changing the LAYOUT, which also affects the entire directory structure.

The layout separator also restricts the mailbox names. For example if the layout separator is '.', you can't just set separator to '/' and create a mailbox named "foo.bar". If you need to do this, you can use listescape plugin to add escape the mailbox names as necessary.

A commonly used separator is '/'. It probably causes the least amount of trouble with different IMAP clients. '^' separator is troublesome with Thunderbird. When '\' should be used it must be quoted, so one sets separator = "\\"

You should use the same hierarchy separator for all namespaces. All list=yes namespaces must use the same separator, but if you find it necessary (e.g. for backwards compatibility namespaces) you may use different separators for list=no namespaces.

Namespace settings

  • type: See the "Namespace types" section above
  • separator: See the "Hierarchy separators" section above
  • prefix: The namespace prefix how it's visible in the NAMESPACE reply (if hidden=no) and mailbox list (if list=yes).
  • location: Mailbox location. The default is to use mail_location setting.

  • inbox: "yes", if this namespace contains the user's INBOX. There is only one INBOX, so only one namespace can have inbox=yes.
  • hidden: "yes", if this namespace shouldn't be listed in NAMESPACE reply.
  • list: "yes" (default), if this namespace and its mailboxes should be listed by LIST command when the namespace prefix isn't explicitly specified as a parameter. "children" means the namespace prefix list listed only if it has child mailboxes.
  • subscriptions: "yes" (default) if this namespace should handle its own subscriptions. If "no", then the first parent namespace with subscriptions=yes will handle it. For example if it's "no" for a namespace with prefix=foo/bar/, Dovecot first sees if there's a prefix=foo/ namespace with subscriptions=yes and then a namespace with an empty prefix. If neither is found, an error is given.
  • ignore_on_failure: Normally Dovecot fails if it can't successfully create a namespace. Set this to "yes" to continue even if the namespace creation fails (e.g. public namespace points to inaccessible location).
  • disabled: Set to "yes" to quickly disable this namespace. Especially useful when returned by a userdb lookup to give per-user namespaces.
  • alias_for: If multiple namespaces point to the same location, they should be marked as aliases against one primary namespace. This avoids duplicating work for some commands (listing the same mailbox multiple times). The value for alias_for is the primary namespace's prefix. For example if the primary namespace has empty prefix, set alias_for= for the alias namespace. Or if primary has prefix=INBOX/, use alias_for=INBOX/.

  • mailbox { .. } settings can be used to autocreate/autosubscribe mailboxes and set their SPECIAL-USE flags.

Shared Mailboxes

See SharedMailboxes.

Examples

Mixed mbox and Maildir

If you have your INBOX as mbox in /var/mail/username and the rest of the mailboxes in Maildir format under ~/Maildir, you can do this by creating two namespaces:

namespace {
  separator = /
  prefix = "#mbox/"
  location = mbox:~/mail:INBOX=/var/mail/%u
  inbox = yes
  hidden = yes
  list = no
}
namespace {
  separator = /
  prefix =
  location = maildir:~/Maildir
}

Without the list = no setting in the first namespace, clients would see the "#mbox" namespace as a non-selectable mailbox named "#mbox" but with child mailboxes (the mbox files in the ~/mail directory), ie. like a directory. So specifically with inbox = yes, having list = no is often desirable.

Backwards Compatibility: UW-IMAP

When switching from UW-IMAP and you don't want to give users full access to filesystem, you can create hidden namespaces which allow users to access their mails using their existing namespace settings in clients.

# default namespace
namespace inbox {
  separator = /
  prefix =
  inbox = yes
}
# for backwards compatibility:
namespace compat1 {
  separator = /
  prefix = mail/
  hidden = yes
  list = no
  alias_for =
}
namespace compat2 {
  separator = /
  prefix = ~/mail/
  hidden = yes
  list = no
  alias_for =
}
namespace compat3 {
  separator = /
  prefix = ~%u/mail/
  hidden = yes
  list = no
  alias_for =
}

Backwards Compatibility: Courier IMAP

You can continue using the same INBOX. namespace as Courier:

namespace inbox {
  separator = .
  prefix = INBOX.
  inbox = yes
}

Alternatively you can create the INBOX. as a compatibility name, so old clients can continue using it while new clients will use the empty prefix namespace:

namespace inbox {
  separator = /
  prefix =
  inbox = yes
}

namespace compat {
  separator = .
  prefix = INBOX.
  inbox = no
  hidden = yes
  list = no
  alias_for =
}

The "separator=/" allows the INBOX to have child mailboxes. Otherwise with "separator=." it wouldn't be possible to know if "INBOX.foo" means INBOX's "foo" child or the root "foo" mailbox in "INBOX." compatibility namespace. With "separator=/" the difference is clear with "INBOX/foo" vs. "INBOX.foo".

Problems with this:

  • Although clients may do LIST INBOX.*, they may still do LSUB *, resulting in mixed results.
  • If clients used empty namespace with Courier, they now see the mailboxes with different names, resulting in redownloading of all mails (except INBOX).

Per-user Namespace Location From SQL

You need to give the namespace a name, for example "docs" below:

namespace docs {
  type = public
  separator = /
  prefix = Public/
}

Then you have an SQL table like:

CREATE TABLE Namespaces (
..
  Location varchar(255) NOT NULL,
..
)

Now if you want to set the namespace location from the Namespaces table, use something like:

user_query = SELECT Location as 'namespace/docs/location' FROM Namespaces WHERE ..

None: Namespaces (last edited 2019-09-12 08:39:23 by MichaelSlusarz)